Cisco 642-832 : Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT)

Wide range of choice

Our company always lays great emphasis on offering customers more wide range of choice. Now, we have realized our promise. Our 642-832 exam guide almost covers all kinds of official test and popular certificate. So you will be able to find what you need easily on our website. Every 642-832 exam torrent is professional and accurate, which can greatly relieve your learning pressure. In the meantime, we have three versions of product packages for you. They are PDF version, windows software and online engine of the 642-832 exam prep. The three versions of the study materials packages are very popular and cost-efficient now. With the assistance of our study materials, you will escape from the pains of preparing the exam. Of course, you can purchase our 642-832 exam guide according to your own conditions. All in all, you have the right to choose freely. You will not be forced to buy the packages.

If you purchase our study materials to prepare the 642-832 exam, your passing rate will be much higher than others. Also, the operation of our study material is smooth and flexible and the system is stable and powerful. You can install the 642-832 exam guide on your computers, mobile phone and other electronic devices. There are no restrictions to the number equipment you install. In short, it depends on your own choice. We sincerely hope that you can enjoy the good service of our 642-832 exam prep.

High reliability

Customers always attach great importance to the quality of 642-832 exam torrent. We can guarantee that our study materials deserve your trustee. We have built good reputation in the market now. After about ten years'development, we have owned a perfect quality control system. All 642-832 exam prep has been inspected strictly before we sell to our customers. The inspection process is very strict and careful. Any small mistake can be tested clearly. So you can completely believe our 642-832 exam guide. What's more, all contents are designed carefully according to the exam outline. As you can see, the quality of our 642-832 exam torrent can stand up to the test. Your learning will be a pleasant process.

Real comments from customers

If you cannot fully believe our 642-832 exam prep, you can refer to the real comments from our customers on our official website before making a decision. There are some real feelings after they have bought our study materials. Almost all of our customers have highly praised our 642-832 exam guide because they have successfully obtained the certificate. Generally, they are very satisfied with our 642-832 exam torrent. Also, some people will write good review guidance for reference. Maybe it is useful for your preparation of the 642-832 exam. In addition, you also can think carefully which kind of study materials suit you best. If someone leaves their phone number or email address in the comments area, you can contact them directly to get some useful suggestions.

Cisco Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) Sample Questions:

1. Topic 8, Ticket 6 : R1 ACL
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be
presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution


Client is unable to ping IP 209.65.200.241...

2. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
On which device is the fault condition located?


Client is unable to ping IP 209.65.200.241

A) ASW1
B) R1
C) R3
D) DSW1
E) R4
F) R2
G) ASW2
H) DSW2

3. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?

A) IPv4 OSPF Routing
B) BGP
C) NTP
D) IPv6 OSPF Routing
E) IPv4 OSPF Redistribution
F) IP NAT
G) IPv4 layer 3 security

4. Refer to the configuration statements shown in the graphic above. R1(config)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1 R1(config)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1 R1(config)#end R1#debug ip packet 199 detail Which statement reflects what the effect is of this configuration sequence?

A) These commands will generate an error message because you cannot use an access list with any debug commands.
B) These commands turn on debug ip packet only for packets between hosts 10.1.1.1 and 172.16.1.1.
C) These commands will only work when you specify only one host rather than two.
D) These commands will have no effect at all. The debug ip packet command will work as normal and display info for all IP packets.

5. Topic 14, Ticket 12 : HSRP Issue
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be
presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution

Solutions: